We can find 3 types of jack connector, monaural TS connector (tip-sleeve), TRS (tip-ring-sleeve) and TRRS stereo plug (tip-ring-ring-sleeve) which is used in most mobile devices, tablets, MP3 etc ...
We can difference these 3 types of connectors according to their diameter:

1. 6.35 mm jack connector or TS.
2. 3.5mm minijack connector or TRS, is the most common, usually used in headphone's output of portable devices.
3. 2.5mm jack connector or TRRS.

It consists of a maximum of three connecting parts being called the largest mass or negative polarity and two smaller size located more towards the end of the connector,
The called positive that correspond to each channel, such three-part plug can transmit signals in two separate channels, also known as stereo signals. There's a mono version, consisting of only two parts, a negative and a positive.

A. Protector
B. Stem
C. Ring
D. Tip
E. Kindred
F. Ring (Signal Right)
G. Tip (Signal Left)

The UHF band that could normally associated with television channels, is a Spanish band in the electromagnetic spectrum, ranging from 300 MHz to 3 GHz. The UHF band can be affected by variables such as humidity, solar wind, or the time of day that will attempt to connect the device. Although as positive could define the UHF frequency band is high, hence its advantages over short distances.Ultra High Frequency (UHF) Cycles per second: 300 MHz to 3 GHz Wavelength: 100 mm 1 m

We showed in a video how to set an alarm for your home, apartment, office, office, business, home or wherever you need quietness and security offered our alarms.

The UHF connector, also called coaxial connector Amphenol is a RF connection design, created at a time when "UHF" referred to the frequencies above 30 MHz. Originally designed to be used as a video connector radar applications, the connector was later used for RF applications. This connector was developed on the basis of a shielded banana plug.

One hertz is one cycle per second, meaning repeating cycle as an event. For example, hertz is applied physics measuring the number of times for a second wave (either acoustic or electromagnetic) is repeated or can be applied, among other uses, to ocean waves that reach the Beach vibrations per second or a solid. The quantity that measures the frequency hertz is called,in this regard, the inverse of the period. One hertz is an oscillation frequency of suffering a particle over a period of one second.

The called VHF is a Very High Frequency band (hence VHF) ranging from 30 Mhz. to 300Mhz.

The VHF is used for sending audio and video signals between a transmitter and a receiver or between a sender and multiple receivers (broadcast).