12/27/2024 11:34 a.m.
http://cablematic.iskra.cat/en/products/cable-ata-100-9cm-idc40-hh-DM011/
http://cablematic.iskra.cat/en/products/cable-ata-100-9cm-idc40-hh-DM011/
Cable ATA-100 9cm (IDC40-H/H)
Cable ATA-100 9cm (IDC40-H/H)
REF: DM011
Specifications
- Cable needed to connect ATA-100/133 disks to the motherboard or controller that supports these formats.
- Small hose of 9cm length of flat cable of 80 conductor wires with IDC40H connectors at both ends.
- Ideal for use in external boxes or where the ATA cable does not have to occupy more than necessary.
Watch video
PVP
€0.25
Price including VAT:
€0.25
PVD
€0.22
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
100%safe
Specifications
- Cable needed to connect ATA-100/133 disks to the motherboard or controller that supports these formats.
- Small hose of 9cm length of flat cable of 80 conductor wires with IDC40H connectors at both ends.
- Ideal for use in external boxes or where the ATA cable does not have to occupy more than necessary.
Related products
Keywords
Did not find what you were looking for? These topic could help you
More info
Cable needed to connect ATA-100/133 disks to the motherboard or controller that supports these formats. Small hose of 9cm length of flat cable of 80 conductor wires with IDC40H connectors at both ends. Ideal for use in external boxes or where the ATA cable does not have to occupy more than necessary.
- Gross Weight: 20 g
- Number of packages: 1
- Master-pack: 500
Technical terms
- IDC
- IDE - ATA
IDC
A connector IDC (insulation-displacement connector) connector IDT (insulation-displacement technology/termination) or insulation displacement connector is an electrical connector designed to be connected to a driver (or drivers) of an insulated wire through a connection process by selective isolation through one or more sharp blades, avoiding the need to strip the cable cover before connecting.The ribbon cable (also known as strip wire or ribbon cable) is designed for use in multi-pin IDC connectors so that the IDC connections can do at once, saving time in applications where many connections are required. These connectors are not designed to be reusable, but can be used again if care is taken to remove the cable.
