12/27/2024 10:49 a.m.
http://cablematic.iskra.cat/en/products/ide-extension-cable-of-20-cm-idc40-mh-CD071/
http://cablematic.iskra.cat/en/products/ide-extension-cable-of-20-cm-idc40-mh-CD071/
IDE extension cable of 20 cm (IDC40-M/H)
IDE extension cable of 20 cm (IDC40-M/H)
REF: CD071
OUTLET
Specifications
- IDE cable with connector type IDC40-Male on one end and another IDC40-Female on the other.
- Useful for when you want to extend an IDE cable or connector, especially the distance between the master unit and the slave.
- The connection is pin-to-pin where the male connector does not have pin 20 and the female connector has all the pins free for insertion.
- In this way the compatibility is maximum with any IDE, ATAPI or ATA interface.
- LongiTud of the 20cm cable.
Watch video
PVP
€3.18
€0.51
Price including VAT:
€0.51
PVD
€2.71
€0.43
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 yearswarranty
14 daysreturns
OUTLET
Specifications
- IDE cable with connector type IDC40-Male on one end and another IDC40-Female on the other.
- Useful for when you want to extend an IDE cable or connector, especially the distance between the master unit and the slave.
- The connection is pin-to-pin where the male connector does not have pin 20 and the female connector has all the pins free for insertion.
- In this way the compatibility is maximum with any IDE, ATAPI or ATA interface.
- LongiTud of the 20cm cable.
Related products
More info
IDE cable with connector type IDC40-Male on one end and another IDC40-Female on the other. Useful for when you want to extend an IDE cable or connector, especially the distance between the master unit and the slave. The connection is pin-to-pin where the male connector does not have pin 20 and the female connector has all the pins free for insertion. In this way the compatibility is maximum with any IDE, ATAPI or ATA interface. LongiTud of the 20cm cable.
- Gross Weight: 30 g
- Product size (width x depth x height): 10.5 x 6.0 x 1.3 cm
- Number of packages: 1
- Packages size: 10.5 x 6.0 x 1.3 cm
- Master-pack: 50
Technical terms
- IDC
- IDE - ATA
IDC
A connector IDC (insulation-displacement connector) connector IDT (insulation-displacement technology/termination) or insulation displacement connector is an electrical connector designed to be connected to a driver (or drivers) of an insulated wire through a connection process by selective isolation through one or more sharp blades, avoiding the need to strip the cable cover before connecting.The ribbon cable (also known as strip wire or ribbon cable) is designed for use in multi-pin IDC connectors so that the IDC connections can do at once, saving time in applications where many connections are required. These connectors are not designed to be reusable, but can be used again if care is taken to remove the cable.
