12/29/2024 4:10 p.m.
http://cablematic.iskra.cat/en/products/network-cable-tester-sc6106-CT005/
http://cablematic.iskra.cat/en/products/network-cable-tester-sc6106-CT005/
Network Cable Tester SC6106
REF: CT005
Specifications
- The type of cable to be tested (UTP, FTP, TEL and BNC).
- The identifier number of the remote terminal.
- The detected error code (OPEN, SHORT and WRONG).
- The pin-out of the cable checked. For this it has two filtersas of 9 numbers where each row corresponds to a cable and each number to a pin.
Watch video
PVP
€40.53
Price including VAT:
€40.53
PVD
€36.55
PVP: Retail price.
Check conditions.
PVP: Sale price to distributors.
Check conditions.
2 years
warranty
warranty
14 days
returns
returns
100%
safe
safe
Specifications
- The type of cable to be tested (UTP, FTP, TEL and BNC).
- The identifier number of the remote terminal.
- The detected error code (OPEN, SHORT and WRONG).
- The pin-out of the cable checked. For this it has two filtersas of 9 numbers where each row corresponds to a cable and each number to a pin.
Keywords
Did not find what you were looking for? These topic could help you
More info
Cable tester with LCD viewer that shows the results obtained in a clear and complete way. It allows the verification of UTP, FTP, TEL and BNC cables. In the LCD viewer it shows:
The tester has two female RJ45 connectors (Main and Loopback) to check cables not installed (hoses). In addition, a terminator is supplied that emits acoustic signals to check cables already installed. It also has 2 control buttons. For checking of coaxial cables are suppliedtwo adapters of RJ45-Male to BNC. To check any type of cable, two adapters are supplied from RJ45-Male to clamps. It works with 4 batteries of type 1.5V AA. Professional performance tester at a very affordable price.
- The type of cable to be tested (UTP, FTP, TEL and BNC).
- The identifier number of the remote terminal.
- The detected error code (OPEN, SHORT and WRONG).
- The pin-out of the cable checked. For this it has two filtersas of 9 numbers where each row corresponds to a cable and each number to a pin.
The tester has two female RJ45 connectors (Main and Loopback) to check cables not installed (hoses). In addition, a terminator is supplied that emits acoustic signals to check cables already installed. It also has 2 control buttons. For checking of coaxial cables are suppliedtwo adapters of RJ45-Male to BNC. To check any type of cable, two adapters are supplied from RJ45-Male to clamps. It works with 4 batteries of type 1.5V AA. Professional performance tester at a very affordable price.
- Gross Weight: 430 g
- Product size (width x depth x height): 12.4 x 6.7 x 2.4 cm
- Number of packages: 1
- Packages size: 21.0 x 15.7 x 6.4 cm
- Master-pack: 10
Technical terms
- RJ45
- BNC
- Types of network cables (UTP, FTP, STP)
RJ45
When we talk about RJ45 ("Registered Jack" 45) we refer to a telecommunications network interface for wired connection of voice and data equipment.
This connector has 8 pins or connections and may have a specific category depending on the data transfer speed and bandwidth (category 5e, 6, etc.)
The common application is their use in Ethernet network cables under TIA/EIA-568-B standard that defines the arrangement of pins (pinout), but can also be used for other applications.
- Direct pin diagram:
EIA-568A
Pin No.1: WHITE-GREEN
Pin No.2: GREEN
Pin No.3: WHITE-ORANGE
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: ORANGE
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
EIA-568B
Pin No.1: WHITE-ORANGE
Pin No.2: ORANGE
Pin No.3: WHITE-GREEN
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: GREEN
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
- Schematic of crossed pins:
The crossover cable has one end with EIA-568A scheme and the other one with EIA-568B.
This connector has 8 pins or connections and may have a specific category depending on the data transfer speed and bandwidth (category 5e, 6, etc.)
The common application is their use in Ethernet network cables under TIA/EIA-568-B standard that defines the arrangement of pins (pinout), but can also be used for other applications.
- Direct pin diagram:
EIA-568A
Pin No.1: WHITE-GREEN
Pin No.2: GREEN
Pin No.3: WHITE-ORANGE
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: ORANGE
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
EIA-568B
Pin No.1: WHITE-ORANGE
Pin No.2: ORANGE
Pin No.3: WHITE-GREEN
Pin No.4: BLUE
Pin No.5: WHITE-BLUE
Pin No.6: GREEN
Pin No.7: WHITE-BROWN
Pin No.8: BROWN
- Schematic of crossed pins:
The crossover cable has one end with EIA-568A scheme and the other one with EIA-568B.