White velvet fabric to be mounted in a pipe-and-drape system. On the horizontal sides it has a pin for the horizontal tube. The horizontal tube passes inside the fabric, being completely covered by the fabric. The horizontal sides are perfectly finished and tight. Fabric size: 2m (high) x 3m (wide).

Introduction to the pipe-and-drape system

Pipe-and-drape system, which allows the massembly of tubular metal structures, which is combined with fabrics. The pipe-and-drape system allows the easy distribution of spaces, assembly of scenarios, assembly of booths/separations in fairs, cover works, etc. A pipe-and-drape structure consists of 4 components, which are combined together, without the need for tools. The assembly is simple and adapts to any need that the user has. The 4 components of a structurecuto pipe-and-drape, are:

1. Base (references #DR0x): Square metal bases on which the structure is mounted. A vertical tube is connected to each base.
2. Vertical tube (references #DR1x): Metallic column of the height that the user requires. It is connected to the base by means of an insert spigot (without screws).
3. Horizontal tube (references #DR2x): Metal beam that is held between two vertical tubesales The fastening to the vertical tubes is done without screws, easily and quickly. The fabrics are hung from the horizontal tubes.
4. Fabric (references #DR4x, #DR5x and #DR6x): Velvet type fabrics (heavy) that are held in a horizontal tube. The fabric has a pin for the horizontal tube.

• Gross Weight: 900 g
• Number of packages: 1